Digital Auto Melting Point Apparatus Up to 300ºC, Suitable for Melting / Boiling Point, Readability in ºC, Resolution 1ºC, Programmable, Visual provision by Optical Magnifier, Automatic Ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 3 samples. The unit consists of a built in magnetic stirrer, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of corning glass having capacity of about 200 ml. It is furnished with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries, one big hole for thermometer and another big hole for boiling point tube / Temp. Sensors for calibration purposes. A variable speed stirrer is fitted in it. The apparatus can be used for determination of boiling points, Temp. effect on viscosity /flow points and molecular weights by Rast’s method with suitable accessories.
• Melting View : Magnifying display of melting operation with the help of adjustable magnifying glass, Melting point reading hold on by activating the “HOLD” key & reading is protected from power failure till “RESET” is not activated.
The instrument basically consists of a Microprocessor Auto Melting Point Apparatus with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, Temperature at the melting point is latched on the digital display and the furnace is automatically cut-off. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. The temperature indicating point of the sample remains displayed on the panel till the switch is “RESET” is operated. Suitable for Melting Point, Recommended for Melting Range 350ºC, Readability ºC, Resolution 1ºC, Programmable, Automatic ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 1 Sample, With Cooling arrangement of Furnace
Melting Point Apparatus Automatic Microprocessor:
• Temp. Range : Ambient to 350ºC & 300ºC
• Display : 3 Digits, 4 Digits or 16X2 lines alphanumeric display
• Resolution : 1ºC & 0.1ºC
• Temp. Sensor : Grade “A” PT-100, Platinum Sensor
• Capillary Dimension : 1.4 mm
• Oven/Furnace Control : Microprocessor controlled closed loop PID
Power Supply : 230 V ± 10% AC, 50 Hz.
Ramp Rates : 2ºC to 10ºC/minute (Selectable Auto-Low-High),
We are offering of Digital Photo Fluorometer.
Digital Friability Test Apparatus is a precision instrument suitable for measuring abrasion strength of tablets. The unit is equipped with two transparent acrylic drums which rotate at a speed of 25 ± 1 rpm. Each of the two acrylic drums are provided with an arm which carries the tablets along with it up to a predetermined height and allows them to fall from that specified height, while the drums are rotating, It is fitted with a digital revolution counter showing the current number of revolutions for the test. A thumb wheel switch is used to set the desired number of rotations. Provision is made to remove the lid of the acrylic drum by unscrewing just one knob. This is available in 1 drum and 2 drum assemblies.
• Seven segment LED display
• Sturdy motor to drive drums at constant speed
• 3 digit bright red seven segment LED display
• ± 1 revolution
• 1 revolution
• 0-999 revolutions
No. of drums:
• Model 937- 1 No.
• Model 938-2 No.
Operating Temp. Range:
• 10º-50º C
• 230 V ± 10%, 50 Hz. AC
• 230 mm (H) X 250 mm (W) X 540 mm (L) (Approx.)
• 9.5 Kg. (Approx
• Drum 1 No. (937), 2 Nos. (938), Dust Cover-1 No.
|Application||Industrial Use, Laboratory Use|
Microprocessor Karl Fischer Titrimeter apparatus is designed for determination of moisture content in solid / liquid samples. Moisture of sample is titrated with Karl Fischer reagent which is added precisely by a motorized pumping system. End point is detected automatically and indicated by audible alarm and LCD display.